NOTE: this unit is should be installed by contractor for professional installation
The Ultra Aire MD33 is the first true in-wall dehumidifier that features a slim profile of only 5 ¾″ deep, allowing it to easily fit inside 2″ x 6″ or through 2″ x 4″ interior stud walls. A mounting kit is available to affix the unit to masonry and CMU block as well.
The Ultra Aire MD33 is energy efficient and runs independent of the HVAC system, removing up to 33 pints of water a day. Sized for up to 1,200 square feet, the MD33 is the perfect solution to control moisture in multi-family applications and features a digital RH control behind a tamper-proof cover.
The unit can be hardwired into existing electrical or directly plugged into a 110v outlet with the provided cord. Designed to drain directly into a hub-drain or plumbing line, the MD33 is truly a hands-off dehumidification system.
- Designed for quiet operation
- Washable air filter
- Ability to be hardwired into existing electrical or directly plugged into a 110v outlet
- Designed to drain into a hub-drain or plumbing line
- Internally mounted digital dehumidistat
|Blower:||155 CFM @ 0.0″ WG|
|Power:||324 Watts @ 80°F and 60% RH
120 Volt, hard-wired — electrical can be routed through bottom or out the back of the cabinet
|Cord:||Optional 10′ cord with plug end|
|Current Draw:||2.8 Amps|
|Energy Factor:||2.0 L/kWh|
|Operating Range:||49°F – 95°F|
|Sized For:||Up to 1,200 Square Feet|
|Minimum Performance at 80°F and 60% RH|
|Water Removal:||33 Pints/Day|
|Controls:||Digital dehumidistat control internally mounted behind tamper-proof cover|
|Air Filter:||½″ Washable — mounted behind diffuser|
|Dehumidistat:||Digital, tamper-proof, float switch input|
|Cover:||Tamper-proof, access lock-out|
|Drain Connection:||¾″ O.D.|
|Drain Hose:||10′ gravity fed (¾″ I.D.) hose, routed through the back, side, or bottom of the unit|
|Refrigerant Type:||R134A (10 oz)|
|Coils:||Electrophoretic coated coils — prevents corrosion and extends life of the unit|
|Utility Connections:||Accessible from front for blind installation|
|Dimensions:||Width: 14 3⁄16″
Depth: 5 ¾″D
|Weight:||Unit Weight: 39 lbs.
Shipping Weight: 57 lbs.
The efficiency of the unit in how much water can be extracter for a certain amount of power. Expressed in pints per Kilowatt/Hour of electricity. The higher the number the more efficient
The efficiency of the unit in how much water can be extracter for a certain amount of power. Expressed in litres per Kilowatt/Hour of electricity. The higher the number the more efficient
Moisture Removal Capacity in pints per day at 80°F and 60% Relative Humidity. Removal varies at other temperatures and moisture levels.
Temperature range the unit will function at. Unit will not remove moisture in temperatures below the operating range.
Power draw in amps during normal operation of the unit. Unit may draw more power briefly during initial power up.
Condensate Pump allows water removed from the unit to automatically be pumped thru tubing to a drain, even if drain is higher than unit. Without a condensate pump, water can only flow to a drain that is lower then the unit.
- Whole house
No posts found